Skip to content

Planning a ride

How do I build a motorcycle route directly on a map?

The short answer

Let the planner draw a first line between start and finish, then shape it with a handful of well-placed waypoints. Drop each point in the middle of the road you want to ride, not on an intersection or in a town center, and check what changed after every point. Before you click anything, read the map itself: road classes, terrain shading and satellite view tell you a lot about curves, traffic and pavement. Finish by zooming along the whole route once.

Updated November 14, 2026

Open atlas next to a compass and an old camera on a wooden table
Photo: Chris Lawton chrislawton · CC0 · Wikimedia Commons · edited (cropped, logo added; previews with headline)

Read before you click: what the map tells you

Before you drop the first point, study the area. A map shows more than most planners calculate.

  • Road classes: US and state highways are usually wider and busier; county roads and minor state routes tend to be quieter and narrower. Unnamed local roads can be great or can turn out rough, gravel or private.
  • Terrain: Shading or contour lines show where the ground climbs. Roads that switch back up a slope or follow a river valley are usually curvier than the straight shot across a plateau.
  • Satellite view: This shows whether a road has a center line, runs through woods or open country, and how built-up it is.
  • Towns: Every town you pass through means lower speed limits, signals and crosswalks. A line that skirts towns usually rides more relaxed.

No planner knows a road's character. The map gives you clues; the call is yours. What makes a good motorcycle road goes deeper on judging one.

The baseline: start, finish, first calculation

Start rough. Set only a start and a finish. For a loop both are the same place, so you need at least one point out in the distance or there's nothing to calculate (planning a loop ride). Then pick a profile:

  1. Run the line once with the fast profile. That gives you the direct connection as a reference.
  2. Switch to a curvy profile and compare. Where the line swings away, the more interesting roads often are.
  3. Decide whether to drop highways, tolls or ferries. Skipping the interstate usually makes the route longer, not automatically better; routes without highways covers the trade-off.

Only now, with a usable baseline, does the real shaping start.

Placing and dragging waypoints

Waypoints are your tools for shaping the line. Some planners and GPS units distinguish between stops you arrive at and shaping points the route only passes through. On the map, the same rules apply to both:

  • Mid-road: put the point on the road you want, well past the turnoff, not on the intersection itself.
  • Not downtown: in town centers, roads sit close together and a point easily lands on the wrong one.
  • One at a time: add a point, then check what changed before adding the next.
  • In riding order: a point out of sequence creates out-and-back stretches. Routes with multiple stops explains how to order them.
What you seeLikely causeFix
Short loop with a U-turnpoint beside the road or on a parallel streetdrag it farther onto the road you want
Out-and-back spurpoint at the end of a dead endmove it to the through road
Route skips your roadprofile or avoid setting rules it outchange profile, add a point
Zigzag through towntoo many points close togetherdelete all but one

Check the line

Once the line looks right, zoom along it from start to finish at a level where you can read road names:

  • No surprise turnarounds or dead-end spurs
  • No gravel or dirt stretches you didn't plan on
  • Towns crossed on purpose, not by accident
  • Ferries and toll roads only where you want them
  • Stops in the right order
  • Distance and estimated riding time fit your day

If a road looks unfamiliar, check satellite view. Ten minutes at the screen beats an hour of detour on broken pavement.

From the map to your device

A carefully shaped line can still look different on the road. Load it onto a GPS as a GPX track and the unit usually follows your line exactly; if the device treats the file as a route, it often recalculates between points using its own map data. More points on the critical stretches help in that case. Exporting a route as GPX and loading GPX onto a motorcycle GPS cover tracks and routes in detail. Maps apps recalculate a shared link too, often from only a few anchor points. For which tools do this well for free, see free motorcycle route planners.

Salomoto today (as of November 2026): The Salomoto route planner works within Germany only. There you set start, destination and stops by place search or by clicking the map, switch between profiles from fast to very curvy, optionally avoid motorways, tolls and ferries, and close a loop back to the start. You can download the finished line as a GPX track with start, via and destination waypoints, or open it in Google Maps, which rebuilds it approximately from a few anchor points. Salomoto doesn't rate roads for scenery and doesn't navigate, so the map work stays with you.

Common questions

How many waypoints should a motorcycle route have?

As few as possible, as many as needed. A day ride often works with five to ten points, as long as each one has a job: forcing a particular road, avoiding a stretch or marking a stop. Every extra point is one more place where the line can snag. If you're adding points just because you're unsure, the route usually gets worse, not better.

How can I spot a twisty road on a map?

Look for lines that hug valleys, ridgelines and rivers, and for roads that switch back across contour lines as they climb. Terrain shading shows where the land gets steep. Whether the road is actually good is something only satellite view or a ride report reveals: width, pavement, development and traffic don't show up in the map graphics.

Why does my route suddenly loop through a town?

Usually a waypoint sits just off the road, on a parallel street or on the wrong side of an intersection. The planner has to hit that point exactly, so it adds a detour with a turnaround. Zoom in, drag the point a little farther onto the road you want, away from intersections, and watch whether the loop disappears.

Planning a trip to Germany?

Lay out the route in Salomoto's route planner, check distance and riding time, and take it along as a GPX file.

Learn about the route planner

Free, no account needed. The planner currently covers routes within Germany only. A free account lets you save and share routes and log rides in RoadDex.