Skip to content

GPX, GPS and maps

How do I export my motorcycle route to GPX without it changing?

The short answer

Before you export, decide who has to read the file: your motorcycle GPS, a phone app, Google Maps or the friends riding with you. Then pick the contents to match. A track locks in the planned line exactly, a route lets the device recalculate, and both together is often the best bet. Use GPX 1.1 unless your device asks for something else, give waypoints useful names, and open the file once to check it after exporting. Planner settings like "curvy" don't travel with the file.

Updated November 14, 2026

Open laptop on a table next to a printed map with a route drawn on it and a pair of scissors
Photo: Iomdames · CC BY-SA 3.0 · Wikimedia Commons · edited (cropped, logo added; previews with headline)

What actually happens when you export

When you export, the route planner writes the result of your planning into a file. Depending on the tool and its settings, that file contains the line as a track, your planning points as a route, individual waypoints and a name. What it doesn't contain are the rules that shaped the ride, such as the curvy profile, avoid highways or avoid tolls, and it doesn't contain the planner's map either. Your GPS brings its own map and its own settings.

That's why a carefully planned twisty loop can suddenly send you down a four-lane highway on the GPS: the device received a route and recalculated it. If track, route and waypoint still blur together for you, start with the motorcycle GPX guide.

Before you click: four decisions

DecisionOptionsRule of thumb
Who reads it?GPS unit, app, Google Maps, friendsKnow the target device before exporting
What goes in?track, route or bothExact line: track; prompts: route; unsure: both
Which version?GPX 1.1, 1.0, vendor variants1.1 unless your device asks for something else
How many points?full, thinnedas many as your device handles

Who reads it? A motorcycle GPS can often handle a track and a route at the same time. Many phone apps only use the track. Riding buddies with a mix of devices are best served by a file with both.

What goes in? Some planners offer this as named options, such as "track without waypoints" or "route, track and POIs". MyRoute-app, for example, describes GPX 1.1 with route, track and POIs as the most common choice for modern GPS units.

Which version? GPX 1.1 has been the standard since 2004. Some older units only read 1.0. A few planners also offer their own variants that only selected devices understand. Use those only if your device is explicitly on the list.

How many points? A track with thousands of points is precise but can be too heavy for some devices. A route with only five points is light but gives the GPS lots of leeway. Put route points deliberately at intersections where the device would otherwise go its own way.

Exporting for each destination

  • Motorcycle GPS: track and route in one file, waypoints with clear names. How to transfer the file and why the unit wants to recalculate on import is covered in load GPX onto a motorcycle GPS.
  • Phone app: the track is usually enough. Which apps read GPX and how to open the file is in open GPX on Android and iPhone.
  • Google Maps: Google Maps itself doesn't export GPX. You can bring a GPX file into Google My Maps, but My Maps exports a map as KML or KMZ, not as GPX. Details and limits are in GPX in Google Maps.
  • Friends and groups: one file per day or leg, all in the same version, plus a note on whether to follow the track or the route.

If you want to take a ride from Google Maps, you'll need a converter. These tools rebuild the line from the points in the shared link using their own routing data. The result can differ from what Google displayed, so check it on a map before you ride.

After the export: a three-step check

  • Open it: load the file into a GPX viewer or editor. Do the mileage, the line and the order of waypoints match your plan?
  • Name it and back it up: give the file a unique name and keep a copy in the cloud or on your phone.
  • Dry run: transfer it to the device, look at the ride there, or run it in simulation mode.

If you still need to shorten, split or thin out the file, see edit a GPX file online. Which free planners export GPX in the first place is compared in free motorcycle route planner.

How export works in the Salomoto route planner

The Salomoto route planner plans rides within Germany, with a start, a destination, stops and a profile such as curvy or very curvy, and you don't need an account. Once the route is calculated, you download it as GPX. If you then change the start, destination or settings, plan again before you export again. The file is GPX 1.1 with one track containing every point of the planned line, plus waypoints for the start, each stop and the destination. Salomoto doesn't export a GPX route with shaping points, and it doesn't offer KML or ITN. If your GPS needs a route, you can usually convert the track to a route on the device or use the waypoints as route points. You can also open the ride in Google Maps with one click, which rebuilds it from a few anchor points and may adjust it.

Common questions

Why does my GPS take the boring road when I planned a curvy one?

Because planner settings aren't stored in a GPX file. Only the result gets exported: points and a line. If you load a route, the GPS recalculates with its own settings and often grabs the faster highway. Follow the track instead, or add enough route points that the device has no room to improvise.

Can I save a Google Maps route straight to GPX?

Not directly. Google Maps doesn't offer a GPX export. Converters can build a GPX file from a shared Google Maps link, but they recalculate the route with their own data, so the line can differ from what Google showed you. For motorcycle rides, it's more reliable to plan in a route planner that exports GPX in the first place.

How should I name GPX files so I can find them on my GPS?

Short and unique, ideally with a date or area and a day number, like "2026-06-Ozarks-Day2". Many units only show the first few characters of a name. Skip special characters in the file name, since some devices trip over them. Give waypoints clear names too, such as "Gas" or "Lunch", so you aren't guessing on the road.

How many points should an exported track have?

Enough to trace the road cleanly, but no more than your device can handle. Planners often export tracks with a very large number of points. Some GPS units and apps cap the point count or slow down with big files. If your manual lists a limit, thin the track with a GPX editor that preserves its shape.

Sources

  1. General information about Export and Save As · MyRoute-app
  2. Route transfer basics · Kurviger
  3. Route Transfer between Google Maps and Kurviger · Kurviger
  4. Export a map (My Maps Help) · Google

Sources accessed November 14, 2026. Traffic laws, road closures and app features change; check current conditions with the responsible agency or the app's provider before you ride.

Planning a trip to Germany?

Lay out the route in Salomoto's route planner, check distance and riding time, and take it along as a GPX file.

Learn about the route planner

Free, no account needed. The planner currently covers routes within Germany only. A free account lets you save and share routes and log rides in RoadDex.