Skip to content

Planning a ride

How do I plan a motorcycle loop that doesn't double back?

The short answer

Decide how long the loop should be and which direction it heads first. Then drop three or four anchor points around your start so the farthest one sits roughly a third of the total length away as the crow flies, and connect them on different roads. Before you commit, zoom along the whole line and look for stretches where the outbound and return legs share pavement; move points until the route is a true ring. Put the long break at the far end and a short one before the ride home.

Updated November 14, 2026

Several motorcyclists on a sweeping road through grassy hills and pine forest
Photo: Ildar Sagdejev (Specious) · CC BY-SA 4.0 · Wikimedia Commons · edited (cropped, logo added; previews with headline)

Why a loop beats an out-and-back

Most weekend rides start and end in the same place: your garage, a buddy's driveway, the motel lot. You can get there two ways. Ride to the overlook and turn around, or ride a loop that never uses the same road twice. The loop wins almost every time. Every curve is new, the second half isn't a rerun, and you're not staring at the same gas station you passed three hours earlier.

A loop is practical too. On a roughly round route, the farthest point is only about a third of the total length from home in a straight line. If the weather turns or you're done for the day, there's almost always a shortcut across the middle. How long the loop should be overall depends on your day; how far to ride in a day covers that.

Four shapes that work on real roads

Rivers, ridgelines and interstates bend roads into their own patterns, so a perfect circle is rare. These four shapes cover nearly every situation:

ShapeWhat it looks likeUse it when
Ringone big bend with no overlapgood roads surround your start
Figure-eighttwo small rings crossing at the startyou want to decide on the road how far to go
Lollipopshort stem out, ring at the end, stem backonly one road leads out of town
Cloverleafseveral short loops from one baseyou're riding day loops from a motel for a few days

The cloverleaf really belongs to longer trips with a home base, which planning a multi-day trip covers. For a single ride, ring and figure-eight are the classics.

Building your loop step by step

  1. Set the time window. How many hours do you have, and how much of that is breaks? That gives you a rough length.
  2. Pick a direction. Hills, a river valley, a lake? That direction becomes the first half of the ride.
  3. Choose a turnaround. Find a place about a third of your planned length away as the crow flies, ideally one worth stopping at.
  4. Add two or three anchors. One on the way out, one on the way back, clearly offset to the side. That forces the planner onto different roads.
  5. Make the destination your start. In most planners, the start simply becomes the last point of the route.
  6. Hunt for overlap. Zoom along the whole line. Wherever the two legs share a road, move an anchor to the other side of the valley or river.
  7. Pick a profile. A curvy profile makes a planner favor twistier roads, but whether a road is any good is still your call. Planning a route on a map goes deeper into reading the map.

Bridges are the classic trap. With a river between your anchors, software loves to send you over the same bridge twice. One extra point on the far bank usually fixes it.

Direction, sun and stops

Which way you ride matters more than most people think. The sun rises in the east and sets in the west. Head west for the first half and come back from the west late in the afternoon, and the low sun stays mostly behind you instead of in your eyes, and in the eyes of drivers looking for you. In spring and fall, when the sun sits low all day, that difference is real.

In right-hand traffic, the center of a clockwise loop is on your right. Ride clockwise around a lake and the waterside pullouts are on your side, so stopping doesn't mean turning left across traffic. Only pull off where parking is legal and safe.

For breaks, a simple pattern works: a longer one at the turnaround, a short one before the last leg home. Put the gas stop around the middle so you don't have to do math on the way back. Planning a ride around stops has ideas, and finding rides near you helps when you're still choosing the area.

Common mistakes and how to spot them

  • The loop is a long, thin oval. You'll ride parallel to yourself, often through the same towns. Make it rounder or switch to a figure-eight.
  • The way home runs through town. Check the last third closely; that's when you're most tired.
  • The best road comes last. Put it early, ride it fresh and keep a reserve if the day runs long.
  • No plan B. Know your shortcut across the middle before you leave.

Salomoto today (as of November 2026): The Salomoto route planner only covers Germany, so it can't build a loop from a hometown elsewhere. For a ride in Germany, you build the loop by hand: set a start and stops, then use the back-to-start option. It's free with no account, offers profiles from fast to very curvy and can avoid highways, tolls and ferries. You see distance, estimated riding time without breaks and an elevation profile, and you can download the loop as a GPX track. The free planner does not generate a round trip automatically from a target length. Saving the loop takes a free account.

Common questions

How big should an after-work loop be?

Work backward from the light you have left, not from a mileage goal. If you've got two hours before dusk, plan a loop the planner says takes well under that, because lights, small towns and a quick stop eat time. A short loop you ride relaxed beats a big one that brings you home in the dark, when deer and other wildlife are often most active near the road.

What if only one good road leads out of my town?

Use a lollipop: ride the same road out for a short stretch, run the loop where roads start to branch, then take the stem home. Keep the stem as short as you can and put it on a road you enjoy anyway. Most of the ride still stays new, and the shared part is the part you know best.

Is a figure-eight a good idea for a loop ride?

Yes, especially when you're not sure how much you want to ride. Two smaller loops cross at or near your start, so after the first one you can decide whether to add the second or call it a day. It works well for a first longer ride, an iffy forecast or a passenger who might want to stop early.

Should I ride a loop clockwise or counterclockwise?

In right-hand traffic, the inside of a clockwise loop is on your right. Ride clockwise around a lake or along a valley rim and the pullouts on the inside are on your side of the road, so you don't have to turn across oncoming traffic to stop. Where the sun sits at each time of day usually matters more, though.

Planning a trip to Germany?

Lay out the route in Salomoto's route planner, check distance and riding time, and take it along as a GPX file.

Learn about the route planner

Free, no account needed. The planner currently covers routes within Germany only. A free account lets you save and share routes and log rides in RoadDex.