Stops and shaping points are not the same thing
Most multi-stop headaches come from mixing up two kinds of points. A stop is a place where you get off the bike: a diner, an overlook, a dealership, the gas station where you meet your buddies. A shaping point (some apps say via point or pass-through point) only forces the route onto a particular road. You ride past it without stopping.
| Point | What it's for | Typical GPS behavior |
|---|---|---|
| Stop | break, meal, meeting someone | arrival alert, route may end there |
| Shaping point | force the line onto a road | silent pass-through, if the unit supports it |
| Destination | end of the ride | final arrival alert |
Rule of thumb: as many stops as you need, as few shaping points as you can get away with. Every extra point is a place where a device can recalculate, try to send you back or announce an arrival. How to place and drag points on the map is covered in planning a route on a map.
Putting the stops in order
List every stop and mark each one fixed or flexible. Fixed means it only works at a certain time: meeting friends at 11, a museum that's closed Mondays, a ferry with a schedule, a small-town diner that stops serving after lunch. Flexible is the overlook you'll enjoy whenever you get there.
- Put fixed stops on the map first. They're the skeleton of the route.
- Sort by geography. Hang flexible stops where they already fall along the way. Zigzagging across the county costs more time than any stop.
- Think about the roads. If a flexible stop means riding your favorite road in only one direction, the road decides the order, not the stop.
- Leave slack at the end. The last stop shouldn't be so tight that any delay knocks it out.
Plenty of planners and GPS units offer to optimize the order automatically. You'll get the shortest route, but the software knows nothing about opening hours or which road you want in the morning. For ideas on which stops are worth it, see planning a ride around stops.
Plan arrival times and opening hours
A route planner shows riding time, not when you'll arrive at each stop. You figure that out yourself in about five minutes. Here's an example with made-up times and a 9:30 a.m. start:
| Leg | Riding | At the stop | Arrive |
|---|---|---|---|
| Start to coffee shop | 1 h 10 min | 30 min | 10:40 a.m. |
| Coffee shop to overlook | 50 min | 15 min | 12:00 p.m. |
| Overlook to diner | 40 min | 60 min | 12:55 p.m. |
| Diner to home | 1 h 30 min | — | 3:25 p.m. |
A timeline like this tells you right away whether the diner is still serving at 12:55 and whether you're home before dusk. Take the riding times from your planner and add a little based on experience; how long a ride will take explains why planners tend to run fast. Check opening hours on the business's own website or by phone, since map listings aren't always current for seasonal places. For spacing coffee and scenic breaks, see coffee and scenic stops; gas is covered in fuel stops on a motorcycle trip.
Put each stop in exactly the right spot
A stop that's only roughly placed can bend half your route. Planners snap each point to the nearest road, and that isn't always the right one: the interstate running past the overlook, the far side of a lake, the service road behind the parking lot.
- Place the point at the parking lot entrance, not on the building or the summit.
- Mind the side of the road. On divided highways, a pullout may only be reachable in one direction.
- Zoom in after placing it and check how the line reaches and leaves the point.
Know your tools' limits, too. According to Google Maps Help (as of November 2026), the desktop version takes up to nine stops including the final destination, and motorcycle GPS units have their own limits on stops and shaping points depending on the model. With lots of stops, split the ride into two legs.
From the plan to your GPS
Whether your stops show up as stops on the road depends on the file and the device. A GPX track reproduces the line exactly; waypoints in the same file mark your stops, but depending on the unit they're announced, only shown or ignored. How your GPS handles that is covered in loading GPX onto a motorcycle GPS. Do a test on the couch before the ride: load the file, scroll through it, check every stop.
Salomoto today (as of November 2026): The Salomoto route planner works within Germany only. There, you set start, destination and stops by search or by clicking the map, free and with no account, and see distance, estimated riding time without breaks and an elevation profile. With a free account you can mark your own places, such as overlooks or meeting points, add them as stops and save the route. The GPX download is a track with waypoints for start, stops and destination, not a GPX route with via points. There's also a link to open the route in Google Maps, where Google rebuilds it from a few anchor points. Salomoto doesn't show opening hours or gas stations.




