Skip to content

Time and ride logs

How long will my motorcycle ride really take?

The short answer

Work it out in three parts: riding time, stops and a buffer. Riding time comes from your route planner, or from the distance divided by your own average on similar roads. Add gas, coffee, lunch and photo stops as fixed blocks, then a buffer for road work, wrong turns and weather. The speed limit is no use as an average, because towns, curves and intersections pull your real pace well below it. Your own past rides give the most accurate numbers.

Updated November 14, 2026

Round speedometer and rev counter of a motorcycle between the handlebars, blurred asphalt behind
Photo: Alexa Wirth planetwirth · CC0 · Wikimedia Commons · edited (cropped, logo added; previews with headline)

Why the planner's time is almost always too short

The time a route planner shows is riding time only. Gas stops, coffee, lunch, photos and waiting for your buddy at the turn aren't in it. The software also assumes traffic keeps flowing and you hold a steady pace. It doesn't know about the tractor before the next town, the flagger at the road work or how you actually ride. A twisty profile makes the route longer and the time longer with it, which is correct, but that time is still non-stop.

A common mistake is plugging in the speed limit as your average. In the US, speed limits are set by each state, and limits on rural two-lane roads differ from state to state and from road to road; the posted sign is what counts. Either way, the limit is a ceiling, not a planning number. A handful of small towns, tight curves, four-way stops and no-passing zones pull your average far below it. Plan with the limit and you'll either arrive late or feel pressure to make up time, and neither belongs on a ride.

Step by step to an honest total

  1. Get the riding time: Use your planner's estimate, or divide the distance by your own average on similar roads.
  2. Apply your personal factor: If you usually take longer than the planner says, add that share.
  3. Add stops as blocks: Every gas, coffee, lunch and photo stop gets its own duration.
  4. Add a buffer: for road work, wrong turns, weather and anything you don't know; more in unfamiliar country or with a group.
  5. Check it against daylight: Make sure you're back before sunset, especially in spring and fall.

If the result doesn't fit your day, shorten the route, not the breaks. How many miles make sense in one day is covered in how far to ride in a day.

Road type and rider change your average

Road typeWhat slows you downWhat it means for planning
Interstateroad work, trafficoften close to the planner's time
Two-lane highway through townslower town limits, lights, farm equipmentslower than the mileage suggests
Twisty back roadtight curves, short sight lines, narrow lanesnever judge time by miles
Mountain switchbacksclimbs, sightseeing trafficplan generously, especially on weekends
Getting in and out of a citylights, rush hourthe first and last miles cost more than their share

The rider and the bike count too. A small-displacement bike has little reserve on faster stretches, which stretches the time; see planning a 125cc motorcycle route. Almost everyone rides more calmly in the late afternoon than in the morning, and that's a good thing. Plan for it instead of fighting it.

A worked example

These numbers are practice assumptions, not benchmarks. Swap in your own.

  • Route of 110 miles; the planner shows 2 h 50 min of riding.
  • Your last few rides on similar roads took about a sixth longer than planned: roughly 3 h 20 min.
  • Stops: gas 15 min, coffee 30 min, lunch 60 min, two photo stops at 10 min each, together 2 h 5 min.
  • Subtotal 5 h 25 min, plus a buffer of about half an hour.

Result: just under 6 hours. Leave at 9:30 a.m. and you're back around 3:30 p.m. Notice how much the stops add up to: a good third of the total. That's exactly the part planners leave out.

Finding your own factor

Your own rides give you the most accurate numbers. After each ride, note the planned riding time, the actual riding time, the total time from leaving to getting back, and the number of stops. What separates riding time from total time, and why apps disagree about it, is explained in moving time vs. total time. After three to five rides a pattern shows up, and your plans start to hold.

None of this is about riding faster. An honest plan takes pressure off: if you know the loop takes six hours, you won't rush the last one. How to keep those records is covered in recording motorcycle rides.

Salomoto today: For a route in Germany, the Salomoto route planner shows distance, estimated riding time without breaks and an elevation profile; you add stops as waypoints and their duration yourself. Salomoto does not account for traffic, road work or gas stations. After the ride, you can log the duration or start and end times by hand in RoadDex.

Legal information on this page refers to the United States, where rules vary by state.

Common questions

Why does Google Maps show a different time than a motorcycle route planner?

Often because they're timing different roads with different assumptions. A motorcycle planner set to a twisty profile picks longer back roads on purpose, and those take longer. General map apps usually look for the fastest way and may factor in traffic. Neither includes your breaks. Before comparing the minutes, check whether the two apps are even showing the same route.

How much time should I budget for a gas stop?

More than pumping the gas feels like. Pulling off, waiting for a pump, paying, gloves off and on, a drink of water: it adds up. Rather than trusting a number from the internet, time your next two or three stops from turn signal to merging back onto the road. Use that as a fixed block per stop from then on, and be generous in rural areas.

Does a group ride take longer than riding solo?

Almost always. Every stop runs longer because more people fuel up, make calls and take photos. On the road the group regroups after lights and towns, and the pace follows the most cautious rider. Plan more stop time and a bigger buffer for a group than for the same route alone, and agree on the breaks before you leave.

Should I plan a ride by miles or by hours?

By hours, with miles as a cross-check. The same 120 miles can be a short morning on the interstate or a full day on small twisty roads. Planning in time shows you right away whether you'll be home before dark and whether there's room for breaks. How far you want to ride in a day at all is a separate question.

Sources

  1. Maximum posted speed limits · Insurance Institute for Highway Safety (IIHS-HLDI)

Sources accessed November 14, 2026. Traffic laws, road closures and app features change; check current conditions with the responsible agency or the app's provider before you ride.

Planning a trip to Germany?

Lay out the route in Salomoto's route planner, check distance and riding time, and take it along as a GPX file.

Learn about the route planner

Free, no account needed. The planner currently covers routes within Germany only. A free account lets you save and share routes and log rides in RoadDex.