Skip to content

GPX, GPS and maps

Can I load a GPX file into Google Maps and ride it?

The short answer

Not directly. The Google Maps app has no GPX import and won't follow a track turn by turn. You can import the file into Google My Maps on a computer and view it as a layer, but navigation then only takes you to individual points along Google's own roads. To ride the route in Google Maps, rebuild it as directions with up to nine stops placed at the turns that matter, and compare the result with the GPX line. If the ride has to be followed exactly, use an app that reads GPX.

Updated November 14, 2026

Hand holding a smartphone that shows a map with a green location dot
Photo: Intel Free Press · CC BY-SA 2.0 · Wikimedia Commons · edited (cropped, logo added; previews with headline)

Showing a GPX file is not the same as riding it

Most "GPX in Google Maps" guides stop at the import, and that's where the misunderstanding starts. Google has two different products here, and only one of them reads GPX:

ToolReads GPX?What you get
Google Maps appnonavigation between places on Google's own roads
Google Maps on a computernodirections with stops, which you can drag and send to your phone
Google My Maps (web)yes, as an importyour track as a line on a custom map, no guidance

So you can see your ride in Google's world, but Google won't ride it with you. Navigation always means Google calculating its own roads between places. A GPX track, on the other hand, is a fixed line. The difference between the two is explained in the motorcycle GPX guide.

Putting the track on a map with My Maps

My Maps is the free custom-map tool in your Google account. It works best in a desktop browser:

  1. Open My Maps on a computer, signed in to your Google account, and create a new map.
  2. In the first layer, choose Import and select your GPX file. Google lists GPX alongside KML, KMZ, CSV and spreadsheet formats, with a limit of 40 MB for non-KML files.
  3. Check the result: one line for the track, pins for any waypoints. Give the map a clear name.
  4. Add a second layer for notes such as gas stops or a lunch spot if it helps. A map can have up to 10 layers.

On the phone, Google says your custom maps appear in the Google Maps app at the bottom of the Saved tab on Android, or in a mobile browser. The dedicated My Maps app for Android was shut down in 2021, so older tutorials that mention it are out of date. On an iPhone, look under Saved as well, and fall back to the browser if the map doesn't show up.

What you have now is a reference: you can glance at the line at a rest stop or tap a pin and ask for directions to it. Google then plans the way to that pin on its own terms.

Rebuilding the ride as Google directions

If you want voice prompts from Google Maps, you have to turn the track into a route Google understands. That means choosing stops yourself:

  1. Open the track in My Maps on one screen and Google Maps on another.
  2. In Google Maps on the computer, enter your start and add stops along the line. Google allows up to nine stops, and that includes the destination.
  3. Place stops right after the junctions where Google would otherwise take a faster road, not in the middle of a long stretch it would choose anyway.
  4. Under Options, avoid highways and tolls if your track sticks to backroads.
  5. Drag the blue line where it still drifts, then compare each leg with the GPX layer.
  6. Send the directions to your phone and look at them again on the small screen before you ride.

Expect compromises. Google prefers quick, wide roads, and it has no curvy setting. Its developer documentation lists two-wheeler routing only for certain countries, and as of November 2026 the United States isn't one of them. Links that carry a route into Google Maps have their own limit too: Google's URL rules allow three waypoints when the link opens in a mobile browser and nine otherwise. For a long ride, split it into legs.

When Google Maps is the wrong tool

Google Maps is fine for getting to the start of a ride, for rides where the destination matters more than the road, and for quick detours. It's a poor fit when:

  • the ride only makes sense on its exact twisty roads,
  • it needs more stops than Google allows,
  • you'll be in canyons or rural areas with no cell signal for long stretches,
  • your group shares one GPX file and everyone should ride the same line.

In those cases, load the file into an app or device that follows tracks. How to get it onto a phone is in open GPX on Android and iPhone, dedicated units are covered in load GPX onto a motorcycle GPS, and what to look for in an app is in free motorcycle navigation apps. If you need a GPX from a ride you drew in Google Maps, see export a motorcycle route to GPX.

Google Maps and the Salomoto route planner

The Salomoto route planner plans rides within Germany and offers both paths. "Open in Google Maps" sends the route as a link built from up to nine anchor points on a computer and three on a phone, with highways, tolls and ferries avoided, so Google may change parts of the line. The GPX download contains the full planned line as a track with waypoints for the start, the stops and the destination. Salomoto doesn't import GPX files and doesn't navigate; Google Maps or your riding app does that part.

Common questions

Can Google Maps guide me turn by turn along a GPX track?

No. Google Maps navigates between places and calculates the roads in between itself. A GPX track shown in My Maps is a picture on the map, not a set of instructions. The closest you get is rebuilding the ride as directions with stops at the key junctions, which still lets Google choose the roads between those stops.

How many stops can a Google Maps route have?

Google's help pages say you can add up to nine stops, and that count includes the final destination. A long twisty ride usually needs more than that to stay on the planned roads. Split it into two or three legs, each starting where the last one ended, and check every leg against the GPX line.

Does Google Maps have a motorcycle mode in the US?

Google's developer documentation offers two-wheeler routing only in certain countries, and as of November 2026 the United States isn't on that list. Riders here use the regular driving mode, often with highways and tolls avoided. That keeps you off interstates, but it doesn't look for twisty roads, so a motorcycle route planner is the better place to design the line.

Why does my ride look different after I send it to Google Maps?

Because Google rebuilds it. Only a handful of points travel to Google Maps, and Google connects them with its preferred roads, often faster and straighter ones than you planned. Add stops where Google drifts, avoid highways if you planned backroads, and accept that a perfect copy of a long twisty line isn't realistic.

Sources

  1. Create or import map features · Google My Maps Help
  2. Deprecation of My Maps for Android · Google My Maps Help
  3. Get directions & show routes · Google Maps Help
  4. Get started with Maps URLs · Google for Developers
  5. Countries and regions supported for two-wheeled vehicles · Google for Developers

Sources accessed November 14, 2026. Traffic laws, road closures and app features change; check current conditions with the responsible agency or the app's provider before you ride.

Planning a trip to Germany?

Lay out the route in Salomoto's route planner, check distance and riding time, and take it along as a GPX file.

Learn about the route planner

Free, no account needed. The planner currently covers routes within Germany only. A free account lets you save and share routes and log rides in RoadDex.