Three clocks for one ride
A ride summary usually shows more than one time, and they measure different things. Here's what each one means.
| Term | Also called | What it measures | Use it for |
|---|---|---|---|
| Moving time | riding time | time spent in motion | comparing riding between rides |
| Stopped time | pause time | standing still while the clock runs | seeing how long your breaks really are |
| Total time | elapsed time | start to finish, everything included | planning your day and daylight |
| Estimated riding time | planner time | a forecast of moving time, no breaks | the starting point of a plan |
Total time is simply moving time plus stopped time. Strava describes elapsed time as the span from hitting start to finishing the activity, stops included. The fourth row is the one that causes the most confusion: the time a route planner shows before you leave is a prediction of moving time only. Comparing it with the total time of a finished ride will always make the plan look badly wrong. Turning that forecast into a realistic total is what estimating how long a ride will take is about.
Why two apps rarely show the same numbers
Record the same ride with two apps, or with an app and a GPS unit, and the times will differ. Usually that's not an error. Each device makes its own decisions:
- When "slow" becomes "stopped": Apps separate moving from resting with a speed threshold, and each picks its own. Crawling in traffic may count as moving in one app and as stopped in another.
- Auto-pause versus manual pause: Some recordings pause automatically, some only when you tap pause. Strava, for example, respects pauses stored in the file and otherwise calculates moving time from the GPS data. Pause by hand and forget to resume, and part of the ride disappears.
- GPS noise at a standstill: At a café table your position drifts by a few feet, which can look like very slow movement. Tunnels and deep valleys cut the signal and create gaps.
- Device switched off at stops: Garmin's zūmo manual advises leaving the unit on during frequent stops so it can measure elapsed time accurately. Turn it off for lunch and the lunch break may simply vanish from the total.
- Different distances: Apps smooth the recorded points differently, so mileage varies a little, and so does every average built on it.
The practical rule: compare rides only within the same app with the same settings.
Which number to use for what
- Planning tomorrow's ride: your typical moving time on similar roads, plus your typical stopped time.
- Getting home before dark: total time, always.
- Comparing two routes: moving time, recorded the same way both times.
- Judging fatigue: total time in the saddle and between breaks tells you more than any average.
- Logging a ride by hand: departure and return times give total time without any app at all.
Averages are a by-product of these numbers, not a goal. They mostly reflect the roads you chose and how often you stopped.
Your stop share: the number planners don't show
Most riders underestimate how much of a day goes to stops. You can measure it from a few of your own rides: divide total time by moving time. Suppose, purely as an example, that your rides keep landing around one and a half. Then a ride with three hours of riding fills about four and a half hours of your day. That ratio is personal. It depends on how you like to ride, on group or solo, and on season. Once you know it, plans stop surprising you. How to make breaks worth the time is the subject of coffee and scenic stops on a motorcycle ride.
Logging time consistently
Whatever you use, pick one method and stick to it. In a hand-written or digital ride log, the most reliable entries are departure time, return time and a riding time from your trip computer or app, if you have one. The motorcycle ride log guide covers which other fields are worth keeping, and recording motorcycle rides compares logs with GPS tracking.
RoadDex today: In RoadDex you enter either a duration or start and end times by hand, next to date, bike and distance. RoadDex has no timer and records no GPS, so it doesn't split moving and stopped time for you. For routes in Germany, the Salomoto route planner's riding time, shown without breaks, is the estimate to compare it with.




